
FPF2188L Simlis/Simetrix circuit. 

1. Extract all the files in the 7.z and put them in the same folder.  
2. Drag FPF2188L.sxslb file into the "Command Shell"in the Simplis, and install the symbol. 
3. Drag FPF2188L.lb file into the "Command Shell" in the Simplis, and install the library. 
4. Open the "FPF2188L_.sxsch" file and run the simulation. 

If error occurs while simulation starts, please check this. 
1. In the "File" tab, click the "Symbol Manager" and check if the FPF2188L is in the list. 
2. Also In the "File" tab, click the "Model Library", and check if theFPF2188L is in the list in the bottom.
3. If either is not in the list, repeate the installation again in the above. 


**** File info****
1. FPF2188L.lb : Library file for the FPF2188L operation. Device operation is determined by this file. 
2. FPF2188L.sxslb : FPF2188L symbol file, graphical information is provided.  
3. FPF2188L.sxsch : Reference schematics with the FPF2188L. Peripheral values can be changed. 


*****Implemented list*****
1. Switch operation 
2. Soft-start of the MOSFET. 
3. MOSFET Ron is matched 
4. OVP
5. OVL_SEL 
6. BUS_DET
7. OTG_DET
8. DIS pin 
9. Timing for OVP enable/disable 
10. OTG_OVP 

*****Not implemented ***
1. Surge test is not implementd 
2. OTP is not implemented. 


