NCP373: Voltage Protection, ±30 V , with Load Switch

具体说明: The NCP373 is an overvoltage, overcurrent and reve...
  • The NCP373 is an overvoltage, overcurrent and reverse control device. Two main modes are available by setting logic pins.
    First mode is Charging Mode from Wall Adapter to the system or from Vbus port to downstream DCDC. In this mode the system is both positive and negative overvoltage protected up to +28 V and down to -28 V. The wall adapter is disconnected from the system if the input voltage exceeds the overvoltage (OVLO) or undervoltage (UVLO) thresholds.
    The second mode, called the Reverse Mode, allows an external accessory to be powered by the system battery or supply upstream accessory through Vbus port. Here, the external accessory would be connected to the device input (bottom connector of system) and the device battery would be at the device output. In this case, overcurrent protection (externally adjustable) is activated to prevent accessory faults and battery discharge. Thanks to the NCP373 using an internal NMOS, the system cost and the PCB area of the application board are minimized. The NCP373 provides a negative going flag (FLAG(BAR)) output which alerts the system that a fault has occurred. In addition, the device has ESD protected input (15 kV Air) when bypassed with a 1.0 µF or larger capacitor.
  • 特性
  • Overvoltage Protection up to 28 V
  • Overvoltage Protection down to -28 V
  • On-Chip Low RDS(on) NMOS Transistor: 130 or 200 mohm
  • Overvoltage and Undervoltage Lockout (OVLO and UVLO)
  • Alert FLAG(BAR) Output
  • Logic pins /DIR and /EN
  • Adjustable Reverse Overcurrent protection up to 400 or 1300 mA
  • This is a Pb-Free Device
  • Compliance to IEC61000-4-2 (Level 4), 8.0 kV (Contact), and 15 kV (Air)
  • Soft start
  • 终端产品
  • Cell Phones, Digital Still Cameras, Personal Media Player and other USB hosts
  • 技术文档及设计资源
    产品更改通知
    供货情况和样品
    NCP373MU04TXG
  • 状况: Active
  • Compliance: Pb-free Halide free 
  • 具体说明: Voltage Protection, ±30 V , with Load Switch, Load Switch with Voltage Protection +/- 30V
  • 封装 类型: LLGA-12
  • 封装 外形: 513AK
  • MSL: 1
  • 容器 类型: REEL
  • 容器 数量: 3000
  • 库存

  • Market Leadtime (weeks):17 to 20
  • Arrow:0
  • ON Semiconductor:9,000
  • NCP373MU13TXG
  • 状况: Active
  • Compliance: Pb-free Halide free 
  • 具体说明: Voltage Protection, ±30 V , with Load Switch, POS & NEG OVP WITH OCP
  • 封装 类型: LLGA-12
  • 封装 外形: 513AK
  • MSL: 1
  • 容器 类型: REEL
  • 容器 数量: 3000
  • 库存

  • Market Leadtime (weeks):8 to 12
  • Arrow:0
  • ON Semiconductor:12,000
  • Specifications
  • VCC Min (V): 1.2 
  • VCC Max (V): 30 
  • P(AV) Max (W): 0.8 
  • VIT+ Typ (V): 5.77 
  • VIT Typ (V): 5.705 
  • IDDH Max (µA): 315 
  • TA Min (°C): -40 
  • TA Max (°C): 125 
  • Package Type: LLGA-12 
  • ON Semiconductor 完整版網站